Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
14
15
23
Release the cap and nut from electronic ignition module. Attach electronic ignition module and heat shield to the cart right
back of the electronic ignition module. Total (2) connections, shown A.
electronic ignition module. Total (5) connections. Connect the two wires {(a) and (b)} from the switch wiring harness into the
Inside of cart, connect each of the wires from the main burner electrodes, and sideburner electrode into the back of the
side panel with the nut, shown B.
Insert AA battery into ignition module, negative (–) end first. Then put on the cap, shown C.
+
-
ignition module
Electronic
Nut
Cap
wire
NOTE: Switch terminals are larger than electrode
terminals and should only be installed in
location shown as A, B.
AA battery
Right side panel
B
C
1
2
3
(a)
(b)
4
5
A
Heat shield
Under sideburner shelf, attach sideburner ignitor wire to electrode, shown A. Place sideburner grate onto sideburner shelf,
aligning grate legs with holes in shelf, shown B.
A
Sideburner Ignitor Wire
Electrode
Sideburner grate
B