Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Side Burner Assembly
4
Correct Alignment
A
Burner Tube
side burner
Valve
D
#10-24x3/8” Screw
#10 Lock Washer
5mm Silicon washer
#10-24x3/8” Screw
#10 Lock Washer
5mm Silicon Washer
Insert back of side burner through left shelf cut-out shown C,
reverse 180° after go through the cut-out and make center stud on
bottom rear of burner fits into center hole in burner pan on left
shelf.
Make sure burner tube aligns correctly onto side burner valve
underneath left shelf shown B.
Secure burner to pan using two #10-24x3/8" screws and 5mm
silicon washer and #10 lock washers shown D.
Attach side burner igniter wire from igniter module to electrode tip
underneath left shelf shown E.
Ignition Wire
Electrode
#5-40x1/5” Screw
Insert the side burner valve into the side burner and secture it to
the bracket using two #5-40x1/5” screws shown A.
B
Incorrect Alignment
Correct Alignment
C
E
Burner Tube
side burner
Valve
#5-40x1/5” Screw
This surface
turn over 180°
and insert into
cut-out then
turn back
when locating
onto the the
bracket.
18 • 463250308