Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
12
Match-Lighting
▲ Do not lean over grill while lighting.
1. Open lid. Turn ON gas at LP cylinder.
3. Push in and turn far left burner knob to the HIGH position.
Be sure burner lights and stays lit.
4. Light adjacent burners in sequence by pushing knobs in and
turning to the HIGH position.
CAUTION
If ignition does NOT occur in 5 seconds, turn the
burner controls OFF, wait 5 minutes and repeat the
lighting procedure. If the burner does not ignite with
the valve open, gas will continue to flow out of the
burner and could accidently ignite with risk of injury.
Turn controls and gas source or tank OFF when not
in use.
WARNING
Sideburner Ignitor Lighting
▲ Do not lean over grill while lighting.
1. Open sideburner lid. Turn ON gas at LP cylinder.
2. Turn sideburner knob to the HIGH position, push and hold
ELECTRONIC IGNITOR button.
3. If sideburner does NOT light within 5 seconds, turn knob to
OFF, wait 5 minutes, then
Sideburner Match Lighting
1. Open sideburner lid. Turn ON
2. Place lit match near burner.
3. Turn sideburner knob to the
Be sure burner lights and
stays lit.
2. Place match into match holder (hanging from left side panel of
grill). Light match; then light burner by placing match through
the match light hole on left side of grill.
HIGH position.
8. For grills equipped with ELECTRONIC IGNITION at
Repeat steps 4 through 6 to light each burner.
9. Once each burner has ignited, turn knobs to desired setting.
each burner:
gas at LP cylinder.
repeat lighting procedure.
NOTE: Your grill may NOT be equipped with a Sideburner!
Ignitor Lighting
▲ Do not lean over grill while lighting.
1.
2.
3.
4.
5.
Turn OFF gas burner control valves.
Turn ON gas at LP cylinder.
Open lid during lighting.
To ignite, push and turn IGNITION BURNER knob to HIGH.
lights.
6. If ignition does NOT occur in 5 seconds, turn the burner
controls OFF, wait 5 minutes and repeat the lighting
procedure.
7. To ignite remaining burners, turn knob to the HIGH position
starting with the burners closest to IGNITION BURNER first.
If ignitor does not work, follow match lighting instructions.
Push and hold ELECTRONIC IGNITION button until the burner .
SEAR Burner Ignitor Lighting
▲ Do not lean over grill while lighting.
1.
2.
3.
4.
5.
Turn OFF gas burner control valves.
Turn ON gas at LP cylinder.
Open lid during lighting.
To ignite, push and turn SEAR burner knob to HIGH.
burner lights.
6. If ignition does NOT occur in 5 seconds, turn the burner
controls OFF, wait 5 minutes and repeat the lighting
procedure.
Push and hold ELECTRONIC IGNITION button until the .
SEAR Burner Match-Lighting
▲ Do not lean over grill while lighting.
1. Open lid. Turn ON gas at LP cylinder.
3. Push in and turn SEAR burner knob to the HIGH
burner lights and stays lit.
2. Place match into match holder (hanging from right side
panel of grill). Light match; then light burner by placing
match through the match light hole on right side of grill.
position. Be sure