Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
18
3
4
Control Panel
Attach control panel / HVR assembly to firebox with two #10-24x1/2’’ machine screws, 5x15 fiber washers and #10-24
flange nut.
Burner
Place burner assembly into firebox. Make sure burner tubes are correctly engaged with valves. Fasten the burner
assembly to the firebox using 5x15 fiber washers and #10-24x1/2’’ machine screws. Insert #10-24x1-1/4’’ machine
screws from outside the firebox, then fasten with #10-24 flange nuts and 5x15 fiber washers from the inside (A).
Insert one end of burner clip into hole in venturi tube and hook other end around valve manifold. Attach ignitor wire to
ignitor (B).
5x15
Fiber Washer
Qty.2
#10-24x1/2’’
Machine Screw
Qty.2
#10-24
Flange Nut
Qty.2
HVR Assembly
5x15
Fiber Washer
Qty.6
#10-24
Flange Nut
Qty.4
#10-24x1/2’’
Machine Screw
Qty.2
#10-24x1-1/4’’
Machine Screw
Qty.4
Venturi Clip
Qty.2
B
A
Burner assembly
Ignitor
Valve
Venturi
Tube
Venturi Clip
Ignitor Wire