Centro G41205 Gas Grill User Manual


 
12 13
Place the heat shield (CG) into the groove which
is located at the back side of the front panel as
shown in  gure A. Next, attach the heat shield
(CG) to the upper back panel (BI) by using the self
tapping screw (x2), as shown in  gure B.
First place the  ame tamers (BF) and then the
cooking grates (BG) into the burner box.
Place the warming rack (BH) onto the burner box.
BF
CG
DH
DE
BI
BH
BG
Back view
A
B
ASSEMBLY INSTRUCTIONS
13
14
YOU WILL NEED:
9
ASSEMBLY INSTRUCTIONS
12
a. Position the side burner (CN) through the
opening in the left side burner drip pan (CL).
Underside view
CN
b. Make sure that the burner (CN) engages the
side burner valve (CM) as shown in  gure B.
c. Using the wing nut provided, assemble the side
burner (CN) to the side burner drip pan (CL), as
shown in  gure C.
A
B
C
CL
d. Attach the end of the side burner electrode
wire (CO) to the underside of the side burner
electrode, as shown in  gure D.
Ensure that the wire is pushed in  rmly.
CO
CP
D
E
e. Place the side burner cooking grate (CP) into
postion on the side burner shelf, as shown in
gure E.
YOU WILL NEED:
13
X 2
X 1
C
CN