Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
2
C O N N E C T I N G Y O U R
G R I L L T O T H E
N AT U R A L G A S S O U R C E
1. A professionally-installed shut-off valve between the supply piping and the
socket is recommended, but not required, by the National Fuel Gas Code.
Socket connection must be made outdoors.
2. Coat the gas supply pipe nipple with gas resistant dope or Teflon tape.
Screw socket onto gas supply pipe (house gas source) as shown in Figure A below,
and wrench-tighten.
The quick disconnect socket should never be connected to the grill.
Direction of gas flow is indicated on the socket.
C A U T I O N
3. Pull back the sleeve on the quick disconnect socket and insert the unattached
end of the gas hose into the socket. Release the sleeve and continue pushing the
hose into the socket until the sleeve snaps into the locked position. See Figure B
.
Fig. A
Fig. B
Gas hose
Quick disconnect socket House piping
Sleeve