Broilmaster U48 Gas Grill User Manual


 
The U26 and U26SS Patio Base Posts are only
for use with Broilmaster
®
Gas Grills. Before
proceeding with installation read the Owners
Manual for the proper location and minimum
clearances to combustible materials for your grill
and patio base post.
Verify that all parts listed in the exploded view of
this product have been included before beginning
this installation.
Recommended Tools:
Two adjustable wrenches or a socket set
A medium Phillips screwdriver
Pipe thread sealer or Teflon tape (for gas
connections)
Soapy water solution (to test for leaks)
1
2
PATIO BASE POST ASSEMBLY
11
Attach four ˘-20 x 4" eyebolts (7) to the bottom of
the square post using hex head bolts (5), flat
washers (1), lock washers (2), and nuts (3).
Figure 1.
NOTE: The large rectangular cut out is located at
the front of the post near the top.
Fasten the bottom of the post to the cast iron patio
base using flat washers (1), lock washers (2), and
nuts (3). F
IGURE 2.
Anchor the base to your patio using the two holes
provided in the base. (Hardware not included)
Note: Make sure that the large rectangular cut out
is facing in the direction that you want your grill to
face.
FIGURE 2.
FIGURE 2
Insert the flex tubing into the post.
The inlet side of the gas tubing may protrude from
the bottom of the patio base or through the large
circular hole in the back of the square post.
Note: Do not attempt to cut or alter the flex tube in
any way.
3
FIGURE 1
7
5
3
2
1
8
1
2
3