Broilmaster T3 Gas Grill User Manual


  Open as PDF
of 4
 
B100400-5-0907 Page 3
12. Grasp center of one shutter with your right hand, Grasp
actuator rod with your left hand. Pivot smoker shutter
assembly into grill body bottom as you insert actuator rod
through 5/16" hole that you drilled. Refer to Figure 4. The
9" actuator rod will also be inserted through front panel on
the grill surround.
Figure 4
13. Place frame of smoker shutter onto rear, bottom lip of grill
body bottom.
14. Thread knob onto either 7 1/2" or 9" actuator rod.
15. Installation of smoker shutter is completed. Refer to Figure
5.
Attention: Before grilling for the first time, turn grill on high
for approximately 15 minutes to burn off any oil from the
smoker shutter.
Figure 5
DPA100-1 Parts List
Part Name Quantity Part Number
Shutter 6 B100403
Shutter Frame (Assembly) 1 B100844
Shutter Linkage 1 B100406
Hole Template 1 B100407
Acutator Rod 7 1/2" 1 B100408
Knob 1 B100098
B200550 Parts List
Actuator Rod 9" 1 B100550
Bushing 1 R-1404
 previous