Broilmaster P4 Gas Grill User Manual


  Open as PDF
of 24
 
GRILL ASSEMBLY
Recommended Tools
These items are recommended for the assembly
of your grill:
• Phillips screwdriver
• Adjustable wrench set
• Socket set
• Soapy water solution (to test for leaks)
• Liquid soap (for foam grip)
Pull Handle
Place two bolts (31) into holes in pull handle (22)
and through holes on left side of grill bottom (8).
Fasten each bolt with a washer (33), lock washer
(35), and nut (34). F
IGURE 1.
Repeat procedure for the right side.
Grill Mountings
Refer to the Broilmaster
®
Cart, Base, and Post
instructions provided with each accessory for
assembly, installation, and mounting procedures.
5
34
31
35
22
33
8
FIGURE 1
33
35
34
31
Before You Begin
All Broilmaster grills require some assembly and
installation. Follow all instructions unless noted
to apply only to other specific models.
If you purchased an accessory with your
Broilmaster, follow the instructions provided with
the accessory for assembly and installation. If
an instruction refers to a step that is not required
for your grill model, please continue to the next
step.
Each step of the installation is illustrated. In
each illustration parts are identified with “Key”
numbers. Key numbers appear in parenthesis
after a part name is mentioned for the first time in
the instructions and are labeled on the
illustrations. You can reference each part by its
key number on the Parts List if you need help in
identifying a part.
Compare the parts found in the shipping
container to the parts list provided. If any parts
are missing contact your Broilmaster
®
dealer
before beginning assembly.
CAUTION: FOR YOUR SAFETY
PARTS MAY HAVE SHARP EDGES. WEAR LEATHER WORK
GLOVES
AND HANDLE PARTS CAREFULLY DURING THE
UNPACKING
, ASSEMBLY AND INSTALLATION.
 previous next