Broilmaster P3BLW-2 Gas Grill User Manual


 
Page 13B101362-2-0610
Installing Racks
Place the briquet rack (8) or avor screen rack (28) on the burner
assembly.
Position the avor screen (29) on to avor screen rack (28) or the
ceramic briquets (7) evenly on the briquette rack without overlap-
ping.
For Smoker Shutter installation see DPA100 manual included
with your P3S grill.
Set the multilevel cooking grids. See Figure 9.
17
5
4
Figure 9a
Individually place the ‘Char-Master’ briquets in a single layer
evenly on your grill’s briquet rack; DO NOT dump them onto the
briquet rack. A single layer of ‘Char-Master’ briquets is all that’s
needed. DO NOT overlap or stack the briquets.
See Figure 9.
After properly placing the ‘Char-Master’ briquets on your grill’s
briquet rack, there may be some briquets left over. Save them for
future use.
Before cooking, always preheat the grill as directed by the grill’s
operating instructions. Hot briquets cause better, quicker cooking
and better avor.
Cleaning
Routine preheating and routine burn-off (also called postheating)
of a grill will clean the ‘Char-Master’ briquets. Periodically turn
the briquets over while they are cool.
6B
7
8
29
30
(P3S only)
6
Installing Char-Master Briquets
GRILL ASSEMBLY
Figure 9b