Broilmaster BRB-1 Gas Grill User Manual


  Open as PDF
of 28
 
Page 8 B101502-1-0311
BHa & BHaX as s e M B l y
Attention: If applicable, remove protective lm from parts
before installation.
1. Remove the surround from the shipping box and place
the BHA surround into position in the constructed
enclosure. See Figure 1.
2. Secure the BHA surround to the enclosure using eight
(8) 8 x 3/4” Hex Head Screw screws. See Figure 2.
Note: If you have a masonry structure you may need to
substitute for the appropriate masonry fasteners.
3. Place the grease tray into BHA surround by sliding it
under the bracket. See Figure 3.
4. Place the control housing assembly into BHA surround
and secure it to the BHA surround. See Figure 4.
5. Attach the ex line to the bottom of the BHA surround
using the ex line bracket and screw. See Figure 5.
Figure 1
Figure 2
GREASE TRAY
BHAASSEMBLY
Figure 3
BHAASSEMBLY
CONTROLHOUSING
ASSEMBLY
Figure 4
Figure 5
 previous next