Brinkmann 7341 Gas Grill User Manual


  Open as PDF
of 64
 
Choose a good, cleared assembly
area and get a friend to help you put
your grill together. Lay cardboard
down to protect grill finish and
assembly area.
CAUTION! Some parts may
contain sharp edges.
Wear protective gloves
if necessary.
Step 1
Attach cart base to side panels. Insert
four M6 X 12mm bolts (silver) and star
washers (silver) through cart base and
into legs and tighten securely. Be sure
the door hinges face forward.
Step 2
Attach loop strap bracket onto cart
base by using two M6 X 12mm bolts
(silver).
Step 3
Attach back panel to legs using
four M6 X 12mm bolts (silver) and star
washers (silver).
Note: With the help of a friend, turn
the cart assembly over. Try to
minimize the stress to the legs.
Step 4
Attach locking casters to the bottom of
the legs. Tighten caster bolts securely
using hex nut wrench provided in
parts pack.
23
Locking Caster
Hex Nut Wrench
Door Hinge Pin Holes
 previous next