Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
5
Step 6
Install smokestack inside smokestack pilot
as illustrated. Tighten smokestack screw
with
9
⁄
16
" wrench.
Step 7
To install air vent damper, open the firebox
door and attach damper to inside of firebox
door as illustrated. Do not overtighten as this
will make the air vent difficult to open and
close.
NOTE: Make sure air vent damper handle
faces outside of the firebox door.
Step 8
Attach the door latch to the outside of the
firebox door as illustrated. Do not
overtighten hex nut.
Step 9
Attach front shelf and side handle to smoker.
CAUTION: A metal bucket must be kept under
grease hole at all times. Empty or
replace bucket when w full to
prevent spills during removal. Use
caution when removing to avoid
spilling hot grease.
Step 10
Remove nut from temperature gauge hole in
smoker. Remove tightening ring from gauge.
Screw probe into temperature gauge hole in
smoker. DO NOT OVERTIGHTEN!
Metal Bucket
(not included)
Grease
Hole
Butterfly
Damper
Smokestack
Smokestack
Pilot
Smokestack
Screw
Side
Handle
Front Shelf
Temperature
Gauge
Temperature
Gauge Hole