Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
26
Step 12
To attach the right side table
assembly, rst insert the side table’s
xed stands onto the grill body hooks
(Figure 1).
Open the grill hood, then use one
M5 X 12 mm bolts (black) and one
M6 washer to secure the right side
table assembly to the grill body from
the inside (Figure 2).
Use two M6 X 12 mm (black) bolts
and one M6 X 12 mm (silver) bolt to
secure the side table base
(Figure 3).
Step 13
Remove the two M4 X 10 mm bolts
and spring washers from the sear
burner valve.
Insert the sear burner valve
assembly through the hole in the
side burner table base (Figure 1).
Place the bezel over the control
knob mounting stem and position
over holes in side burner table base
and sear burner valve assembly.
Attach with two M4 X 10 mm, bolts
that came with valve.
Then install the sear burner knob
onto valve stem (Figure 2).
Figure 1
Figure 2
Figure 1 Figure 2
Figure 3
Right Side Table Assembly
M5 X 12 mm
Silver Bolt
Hole
Sear Burner Valve
Sear Burner Knob
Bezel
Pin on Bottom