Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Outdoor Charcoal Barbecue Grill Model No. NPC1924N
Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
page no.
5
Step
1
Attach handle and air vent
A. Attach lid handle assembly to lid using 2 sets of medium screws (B), large lock
washers (O), large washers (K), and heat resistant washers (M).
B. Attach air vent to lid using small screw (A), small lock washer (N) and small wing
nut (G).
Step
2
Attach slide
A. Insert slide onto underside of bowl. Turn to lock into place.
B. Attach slide to bottom bowl using medium screw (B), medium washer (J), large
lock washer (O), and large wing nut (H).
Step
3
Attach legs, bottom shelf and wheels
A. With bowl upside down, attach left legs and wheel legs to bottom bowl using
4 sets of leg cups, extra large washers (L), large lock washers (O), and large
screws (C).
Note: Do not tighten large screws (C).
B. Attach bottom shelf to left legs using 2 sets of extra large screws (D), large
washers (K), medium washers (J), large lock washers (O) and large wing
nuts (H).
C. Attach wheels and bottom shelf to wheel legs using wheel axle, and 2 nuts (E).
D. Snap hub caps onto wheels.
E. Tighten large screws (C).
Note: Lid is shown
upside down.
Step
4
Attach ash receiver
Slide ash receiver onto bottom bowl.
Assembly Instructions
DO NOT RETURN PRODUCT TO STORE.
For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial
number available for reference.
For Easiest Assembly:
• To avoid losing any small components or hardware, assemble your product on a hard level
surface that does not have cracks or openings.
• Clear an area large enough to layout all components and hardware.
• When applicable, tighten all hardware connections by hand first. Once the step is
completed, go back and fully tighten all hardware.
• Follow all steps in order to properly assemble your product.