Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Outdoor Charcoal Barbecue Grill Model No. NB2153D
Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
Step
1
Attach handle and air vent
A. Attach handle to lid using 2 sets of heat resistant washers (K), medium washers
(I), large lock washers (M), large wing nut (G).
B. Attach air vent to lid using medium screw (B), small lock washer (L) and small
wing nut (F).
Step
2
Attach handle and air damper
A. Attach handle to bottom bowl using 2 sets of heat resistant washers (K), medium
washers (I), large lock washers (M), large wing nuts (G).
B. Attach 2 air dampers to bottom bowl using 4 sets of small screws (A) and small
wing nuts (F).
Step
3
Attach legs and wheels
A. Attach front legs and wheel legs to bottom bowl using 4 sets of leg cups, large
washers (J), and large screws (C).
Note: Do not tighten large screws (C) until bottom support grid is attached.
B. Attach bottom support grid to front legs using 2 sets of medium washers (I) and
large wing nuts (G).
C. Attach wheels and bottom support grid to wheel legs using 2 large nuts (E).
D. Tighten all 4 large screws (C).
Step
4
Attach basket
Clip front basket to front legs.
Step
5
Attach side table
Attach side table to bottom bowl using 2 sets of small nuts (D), small lock washers
(L), small washers (H) and medium screws (B).
Assembly Instructions
DO NOT RETURN PRODUCT TO STORE.
For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial
number available for reference.
For Easiest Assembly:
• To avoid losing any small components or hardware, assemble your product on a hard level
surface that does not have cracks or openings.
• Clear an area large enough to layout all components and hardware.
• When applicable, tighten all hardware connections by hand first. Once the step is
completed, go back and fully tighten all hardware.
• Follow all steps in order to properly assemble your product.