Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Outdoor LP Gas Barbecue Grill Model No. HBT601B
Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
page no.
7
Operating Instructions
Checking for Leaks
Burner Connections
Make sure the regulator valve and hose
connections are securely fastened to the
burner and the tank.
If your unit was assembled for you, visually
check the connection between the burner
pipe and orice. Make sure the burner pipe
ts over the orice.
WARNING: Failure to inspect
this connection or follow these
instructions could cause a re or an explosion which can cause
death, serious bodily injury, or damage to property.
Please refer to diagram for proper installation.
If the burner pipe does not rest ush to the orice, please contact 1.800.762.1142 for
assistance.
Step
13
Install AAA battery and lighting rod placement
A. Install AAA battery (F) by unscrewing ignitor button. Insert battery into ignitor
opening. Screw ignitor button onto grill body assembly.
B. Hook ring on lighting rod onto hook on side shelf.
Step
14
Completed
Congratulations your assembly is now complete. Read Operating Instructions
before proceeding.
Step
12
Insert warming rack
Slide warming rack into holes in lid and bottom bowl.
Note: Look for corresponding holes on side of lid. Insert short wire ends into lid
holes, one side at a time. Position warming rack legs into slots on grill body sides.
Installing LP Gas Tank
This grill is designed to operate with a (DOT 39 Cylinder) one pound 7-3/8” high disposable
/ 16.4 oz. propane gas tank. DO NOT ATTEMPT TO REFILL ANY ONE POUND (16.4 oz.)
PROPANE GAS TANKS!
If you use a 20 lb. LP tank and hose adapter (sold separately), follow these connection
and leak checking instructions in addition to the directions from the adapter hose
manufacturer on every use.
Insert LP Gas Tank
Insert LP gas tank through LP tank support.
Connect LP Gas Tank
Before connecting, be sure that there is no debris caught in the head of the gas tank, head
of the regulator valve or in the head of the burner and burner ports.
Lubricate the threads of the regulator valve with petroleum jelly, insert the gas tank into the
regulator valve and hand-tighten firmly.
Gas Valve
with orice
Burner
Venturi