Blue Rhino 252726 Outdoor Fireplace User Manual


 
3
Owner’s manual and assembly instructions: model 252726 portable outdoor fireplace 4/02
Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Assembly Instructions
For Best Results:
Remove all contents from packaging and make sure all parts are present before attempting assembly. While
assembling, tighten all bolt connections by hand first. Then, when the fireplace is fully assembled, go back and tighten
with wrenches.
Step 1
Attach two adjustable leg cups (14) to two front legs (7) using two
adjustable leg-cup bolts (A), and attach legs together using front axle
(12), wing nuts (C) and small washers (G), as shown. Make sure the
rim of the cup faces downward when attached, and bottom of cup
touches end of leg.
Step 2
Attach two back legs (8) together using wheel axle (11), and attach
wheels (15) to ends of axle using wheel standoffs (I), wheel washers (F),
and wheel nuts (D), as shown. Install wheel decals (16) on wheels (15).
Step 3
Attach first set of clips (17), to each of the four legs at the lowest
horizontal marking, as shown. Assure that the clips are attached with
the directional arrow facing upwards.