Black & Decker GM60 Electric Grill User Manual


 
English
Before first use
Remove all packaging from the
appliance,
Clean the appliance before first use.
Use
Preheating
Place the unit on a suitable flat surface.
Ensure the grill / griddle plate (1) is
positioned onto the base (3).The drip
tray (4) should be in the bottom of the
base.
Plug the thermostat power lead (2) into
the appliance inlet on the grill unit. This
is located beneath one of the grill
handles (2). The arrow shaped white
power on lamp (7) on the unit will light
up.
Turn the thermostat control wheel (6) on
the thermostat power lead to the
desired heat. The desired heat setting
should line up with the arrow shaped
power on lamp.
The thermostat control will maintain the
heat at this setting.
Grilling
Preheat the grill as described above.
The cooking plate has a non stick
coating however it is also advisable to
lightly brush the grill / griddle plate with
butter, margarine or cooking oil to
prevent food sticking.
Ensure the unit is at the correct cooking
temperature.
Add food to the grill / griddle plate.
The cooking time will vary depending
upon the food type and thickness.
Check and turn the food regularly to
avoid burning.
After use
Switch off and remove the plug from the
socket before leaving the appliance
unattended and before changing,
cleaning or inspecting any parts of the
appliance.
When not in use, the appliance should
be stored in a dry place. Children
should not have access to stored
appliances.
Cleaning and maintenance
Warning! Before cleaning and
maintenance, switch the appliance off,
remove the plug from the socket and allow
the appliance to cool.
Warning! Do not immerse the appliance or
the cord set or the plug in water or any
other liquid.
Do not wash any part of the unit in a
dishwasher.
Wipe the exterior with a damp cloth.
Do not use scouring pads.
If necessary, use a mild detergent to
remove spots. Do not use any abrasive
or solvent based cleaner.
Technical Data
-5-
GM60
Voltage 220-240V
Power 2000W
Weight 3.2Kg