BeefEater Barbecue Gas Grill User Manual


 
Australia’s Leading Barbecue
6
Beefeater Barbecues
Assembly Instructions
Fig 6
Fig 7
Upper slots for Vaporizers
Lower slots for heat reflectors
Assembly Notes
Before any assembly or installation is attempted it is
important that you check for damage or missing parts. Your
dealer or the manufacturer must be notified of any problems
immediately before proceeding.
The main frame of the barbecue has been factory
assembled requiring only the following simple steps for
completion. Check the “Gas Type “ label attached to
barbecue and side burner to be certain this gas type is the
one required for your use eg. Propane / LPG or Natural Gas.
See Fig 5.
Trolleys, roasting hoods and side burners are optional
so read this manual in conjunction with the manual that
comes with each accessory before attaching any other
components. Attach the roasting hood last of all.
Assembly Procedure
Heat Reflectors, Burners And Vaporizers
The modular Vaporizer Grid system has been designed to
maximise the performance of your BeefEater barbecue
The reflectors fit between each burner. They reflect heat
from the burners, upwards to the cooking surfaces.
The Vaporizers are designed to vaporise fats and juices
from the meat. One Vaporizer is fitted over each burner that
is located under the grill. The Vaporizers reduce flare-ups
and help to add that great barbecue flavour.
How Many Vaporizers And Reflectors Are
There?
Model Vaporizer Reflector
2 Bnr: 2 1
3 Bnr: 2 2
4 Bnr: 3 3
5 Bnr: 3 4