Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
6
•Place Side Table(14) over Left Side
Panel(24) and secure by installing two
M6X15 screws through side table and into
threaded hole.
Completely tighten these 2 screws.
STEP 4 - INSTALL
SIDE TABLES
Bolt,
M6x15
Item#23
Threaded
Hole
•Secure the other Side Table over the Right Side Panel in
the same manner.
Make sure side table screws are completely tightened.
Bolt
M6X110
Item#40
Spacer
Item#39
Wing Nut
Item#41
•Align slotted holes on side of Grill Body with holes through edges
of legs. Hold Spacers between Leg and Body (Needle Nose
Pliers may help) and insert Body Bolts through Leg, Spacers, and
slotted holes in Grill Body. Secure using Wing Nuts, but only
partially tighten. Repeat assembly for remaining three Cart legs.
•Remove loose contents from Grill and remove Bottom Panel as
shown. Lay Grill Body(8) on its back with control panel up. Place
Grill Body between Cart Legs and Side Tables with Hose and
Regulator(Item#10) on wheel Leg end. Do not lay Grill Body on,
or step on Hose and Regulator.
STEP 5 - BODY/ CART ASSEMBLY
Remove Bottom Panel
Spacers(39)
WingNuts(14)
M6X110
Bolts
(40)
24
14
Hose/
Regulator
(Item#10)