Aussie 6804S8-S11 Gas Grill User Manual


 
11
Step 12
Side Burner Igniter Wire Connection
The Side Burner Igniter Wire is pre-installed and connect-
ed to the Ignition Box. Attach the wire to the Side Burner
electrode by sliding the wire connector onto the electrode
terminal.
Underside view of
Side Table/Side Burner
Note:
Shown without Regulator
Hose for clarity.
Valve
Step 11
Side Burner Valve Assembly
NOTE: Side Burner Valve is already attached to the regulator hose.
A. Install the Side Burner Valve from underneath the LEFT Side Table. First insert the valve stem out through the hole
in the bezel and fascia on the front of the side table. Next, flex the tube of the burner down and insert the nozzle into
the opening in the burner tube.
B. Install two 5/32” x .31” Bolts through the Control Knob Bezel and front of Side Table and into the threaded Valve
bracket holes. Install the top bolt first by twisting the valve/bracket to align only the top holes. Do not tighten completely.
Next, twist the valve/bracket to align the bottom holes and install the second bolt. Tighten both.
B
A
5/32 x .31” Bolt
2 pc
Top First
Bottom Second
To avoid possible damage to grill, DO NOT ATTEMPT TO LIFT GRILL BY THE SIDE TABLES
CAUTION