Alto-Shaam AR-7EVH Electric Grill User Manual


 
OPERATING INSTRUCTIONS
AR-7EVH Electric Rotisserie with Ventless Hood Operation & Care Manual • 16AR-7EVH Electric Rotisserie with Ventless Hood Operation & Care Manual • 16
WARNING
THE CONVECTION FAN CONTINUES
TO ROTATE DURING THE COOL
DOWN PROCESS. DO NOT OPEN THE
PANEL WHILE COOLING DOWN THE
ROTISSERIE OVEN.
TO ERASE A PRESET
To erase a preset, the oven must be in either the power-up hold mode or in the preheat mode.
The oven cannot be in a cook or automatic hold.
When the oven is in the power-up hold mode or in the preheat mode, press and hold both the
CANCEL key and the appropriate number PRESET key to be erased. The preset indicator
light will go out once the preset is erased.
PRESET MENU LOCK AND UNLOCK
The preset menu keys can be locked at any time in order to prevent inadvertent or accidental setting changes.
To lock the preset keys, press the UP ARROW key along with the ON/OFF Key. The rotisserie will
beep and the preset lock indicator will illuminate. Release all keys. The rotisserie presets
are now locked.
To unlock the preset keys, press the DOWN ARROW key along with along with the ON/OFF Key. The rotisserie will
beep twice and the preset lock indicator will extinguish. Release all keys. The preset keys are now unlocked and ready
for programming.
FAHRENHEIT OR CELSIUS SELECTION
With the control off, press and hold the UP ARROW key for 2 seconds to display the current
temperature scale. Toggle between °F and °C by pressing either the up or down arrow key while
the temperature scale is displayed on the screen.
The new scale will save when the screen clears or the On/Off key is pressed.
COOL DOWN
To cool down the unit:
•PresstheStopbutton
•PresstheCOOL DOWN key. The fan
will turn on. The display will cycle between
"CooL" and the internal cavity temperature.
NOTE: If the door is closed, the display
will show "oPEn door" instead of "CooL".
•PresstheSTOP button again to
cancel the cool down process.
C H IC KE N, W H O LE
CHICK EN
, QUA RTE RS
T U RK EY
B R E AS T
P O RK
R I B S
P O RK
L O I N
L A MB
L E G S
CANCEL key
preset
indicator light
preset lock indicator
ATTENTION
After programming a specific product into memory
on a preset key number, it is suggested the product
be identified by inserting a label in the Program
Menu Identification Card Slot.