3D Connexion RET-2500 Gas Grill User Manual


  Open as PDF
of 15
 
RET Series
8
4.3 Assembly
1. Open the box carton and remove all parts.
2. Open the tool-box. (Fig. 4-1)
This operation must be carried out by a minimum of two people
3. Attach the lower cross bar to the left floor stand side frame and right floor stand side frame using the
supplied screws (M8x55). (Fig. 4-2)
4. Attach the upper cross bar (Fig. 4-3) to the floor stand side frames using the supplied screws
(M8×15).
5. Attach the protection plate (Fig. 4-4) to the upper cross bar with the supplied screws. The protection
plate must be assembled on the front part of the upper cross bar, always keeping the table adjustment
pin upward. (For RET-2500 only, the table supporting shelves (Fig. 4-5) must face the protection
panel)
Fig. 4-2
Fig. 4-3
Fig. 4-4
Fig. 4-5
Fig. 4-1
 previous next