Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
5
ONE ANTENNA/ONE RECEIVER SYSTEMS
If you are using a single antenna with a single TV/radio receiver, “Installation A” shows the
proper connections. To avoid damage to your TV/radio receiver and/or the amplifier power in-
jector, carefully check all the points listed below.
• Do not separate the amplifier from the DC block. The DC block must be between the
amplifier and the 300-to-75 ohm transformer (Cat. No. 15-1140) at the antenna.
• Follow the connection labeling on the amplifier/DC block unit:
TO ANT
enna,
TO POWER
INJECTOR. The amplifier will not receive power if they are reversed.
• Follow the connection labeling on the power injector:
TO TV
,
TO AMPLIFIER
. Your TV/radio
receiver will be damaged if they are reversed.
• If a VHF/UHF splitter is used for a TV, it must be connected between the TV and the power
injector.
The In-Line Amplifier is designed for use with F-type connectors. For some antenna systems
(for scanners, for example), you will have to use connection adapters or make a special cable.
15-1117a.fm Page 5 Thursday, July 15, 1999 11:15 AM