Vanguard Managed Solutions MBDV41 Outdoor Fireplace User Manual


 
22
106497
DIRECT-VENT FIREPLACE
®
REMOVING/REPLACING
GLASS DOOR
CAUTION: Do not operate this
fireplace with a broken glass door
panel. Do not operate this fire-
place without the glass door panel
securely in place. For replace-
ment part information see
Re-
placement Parts
, page 35.
1. Remove the upper louver panel by lift-
ing upward and out (see Figure 46).
2. Remove the screws from the three tabs
at the top of the glass door while hold-
ing door securely keeping it from fall-
ing forward.
3. Grasp door by both sides and ease it
upward off of the lower bracket (see
Figure 47).
4. To replace glass door, follow the above
instructions in reverse.
FIREPLACE
INSTALLATION
Continued
Figure 47 - Removing/Replacing Glass Door
Figure 46 - Removing Top Louver Panel
Top Louver
Panel
You must remove glass door to install op-
tional brick liners, logs, lava rock, and em-
ber material.
Glass Door
Assembly
Screw
Lower Bracket for
Glass Door Assembly