Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
15
106497
OWNER’S MANUAL
VENTING
INSTALLATION
Continued
HIGH ALTITUDE
INSTALLATION
Your Vanguard direct-vent fireplace has
been AGA tested and approved for eleva-
tions from 0-2000 feet and CGA certified
for elevations from 0-4500 feet.
When installing this fireplace at an elevation
above 2000 feet (in the USA), you may need
to decrease the input rating by changing the
existing burner orifice to a smaller size. Re-
duce input 4% for each 1000 feet above sea
level. Check with your local gas company for
proper orifice size identification.
When installing this fireplace at an eleva-
tion above 4500 feet (in Canada), check
with local authorities.
Consult your local gas company to help de-
termine the proper orifice for your location.
For assistance with any high altitude instal-
lation contact DESA International’s Tech-
nical Service Department at 1-800-DESA-
LOG (1-800-337-2564).
PARTS LISTS FOR VENTING
KITS AND COMPONENTS
Note:
Terminations are not designed for
installation prior to transportation.
Vanguard Rigid Venting
Number Description
MDV9K 9' Vertical Vent Kit
Includes one each: 48" Pipe, 36"
Pipe, 24" Pipe, 30° Elbow,
Firestop, Roof Flashing, Storm
Collar, Flue Restrictor Disc, and
Vertical Termination Cap
MDVGFK
Ground Floor Horizontal Vent
Kit
(Allows horizontal installations
that run 49.5" min. vertically and 15"
horizontally from the back of the fire-
place to the outside wall.)
Includes one each: 12" Pipe,
7"-12" Adjustable Pipe, 30° Elbow,
90° Elbow, Firestop, Vinyl Stand-
off, and Horizontal Termination Cap
BGFVK Basic Ground Floor Rigid Vent Kit
Includes: 7" x 60° Elbow, Extended
Adjustable Horizontal Termina-
tion, Wall Thimble and 14 Screws
Number Description
GFVK Ground Floor Rigid Vent Kit
Includes: 7" x 60° Elbow, 7" Ad-
justable Galvanized Coaxial Pipe
(7-12"), Wall Thimble, Horizontal
Termination, RTV Silicone and 16
Screws
BVK Basement Rigid Vent Kit
Includes: 7" x 30° Elbow, 7" x 4'
Galvanized Pipe, 7" x 90° Elbow,
7" Adjustable Galvanized Pipe (7-
12"), Wall Thimble, Horizontal
Termination, RTV Silicone and
20 Screws
CVK Corner Vent Kit
Includes: 7" x 30° Elbow, 7" x
90° Elbow, 7" Adjustable Galva-
nized Pipe (7-12"), 6" Pipe, Wall
Thimble, Horizontal Termina-
tion, RTV Silicone and 20 Screws
SVK Snorkel Rigid Vent Kit
Includes: 7" x 30° Elbow, 7" x 4'
Galvanized Pipe, 7" x 90° El-
bow, 7" Adjustable Galvanized
Pipe (7-12"), Wall Thimble, 36"
Snorkel Termination, RTV Sili-
cone and 28 Screws
RVF Roof Rigid Vent Kit
Includes: Flue Restrictor, Storm
Collar, 7" x 30° Elbow, 7" x 4'
Galvanized Pipe, 7" x 2' Galva-
nized Pipe, 7" Adjustable Gal-
vanized Pipe (7-12"), Firestop
Support, Roof Flashing, RTV
Silicone, Vertical Termination,
and 26 screws
D1000 7" x 12" Galvanized Coaxial
Pipe(6 pcs.)
D1010 7" x 24" Galvanized Coaxial
Pipe(6 pcs.)
D1020 7" x 48" Galvanized Coaxial
Pipe(6 pcs.)
D1030 7" Adjustable (7-12")
Galvanized Coaxial Pipe
(6 pcs.)
D1050 7" x 6" Galvanized Coaxial Pipe
(6 pcs.)
D2000 7" x 90° Elbow (6 pcs.)
D2010 7" x 45° Elbow (6 pcs.)
D2020 7" x 30° Elbow (6 pcs.)
Vanguard Flexible Venting
Number Description
BFGFVK Basic Flex Ground Floor Vent Kit
Includes: Flex Adapter, 7" x 2'
Flexible Pipe, 4" x 2' Flexible
Pipe, Wall Thimble, Horizontal
Termination, (2) Spacer Springs,
(2) 4" Hose Clamps, (2) 7" Hose
Clamps, and 10 Screws
FGFVK Flex Ground Floor Vent Kit
Includes: Flex Adapter, 7" x 4'
Flexible Pipe, 4" x 4' Flexible Pipe,
Wall Thimble, Horizontal Termi-
nation, (4) Spacer Springs, (2) 4"
Hose Clamps, (2) 7" Hose Clamps,
RTV Silicone, and 10 Screws
D1040 7" x 25' Coaxial Flex Pipe
with Spacer Springs
D3080 Rectangular Horizontal Flex
Termination Cap
Vanguard Rigid Venting
(Cont.)
Continued
Number Description
D2030 7" x 60° Elbow (6 pcs.)
D2060 7" x 45° Starter Elbow
D3000 Wall Strap/Offset Support
(6 pcs.)
D3010 Storm Collar (6 pcs.)
D3020 Wall Thimble (6 pcs.)
D3050 Vertical Restrictor (6 pcs.)
D3060 Ceiling Firestop/Support (6 pcs.)
D3070 Rectangular Horizontal Rigid
Vent Termination Cap
D3071 Adjustable Horizontal Rigid
Vent Termination Cap
D3090 Cathedral Ceiling Support Box
D4000 Roof Flashing 6/12-9/12
D4010 Roof Flashing 9/12-12/12
D4020 Flex Connector (6 pcs.)
D4030 Flex Wall Thimble (6 pcs.)
D4040 4" Hose Clamp (6 pcs.)
D4050 7" Hose Clamp (6 pcs.)
D5000 Wood/Vinyl Siding Standoff
(6 pcs.)
Vanguard Rigid Venting
(Cont.)