Valor Auto Companion Inc. 837 AN Outdoor Fireplace User Manual


 
Figure 2. Removal of lower front
casting.
Figure 1. Removal of ignition bar
knob.
Safety Upgrade Instructions
These instructions are for the
Valor Legend Ultra
(Model 837 AN and 837 AP)
Important: Switch the appliance off, isolate the gas supply to the appliance and
ensure that the appliance is completely cool before continuing any further.
1. Removal of Fascia
Cast Iron Fascia
1. Unscrew and remove the ignition bar knob
(See figure 1).
2. Remove the lower front casting by lifting and
pulling forward (See figure 2).
3. Remove two screws located behind the upper
decorative casting (See figure 3).
4. Remove the Fascia by gentle pulling the top of
the fascia forward. Two retaining clips hold the
top of the fascia. Once clear of these the fascia
can be lifted clear of the lower bottom fascia
brackets (See figure 4)
3002783/01
Date: June 2002.
© Valor Heating