Mazda 9999-95-CX9BSM-08 Grill Accessory User Manual


  Open as PDF
of 2
 
Your Vehicle
Detection Areas
WARNING
Do not rely completely on the BSM system
and be sure to look over your shoulder
before changing lanes:
The BSM system can assist the driver in confirming
the safety of the surroundings but is not a complete
substitute. The driver is responsible for assuring lane
changes and other maneuvers. Always pay attention to
the direction in which the vehicle is traveling and the
vehicle’s surroundings.
The BSM system does not operate when the vehicle
speed is lower than about 20 mph (32 km/h).
See “BSM Precautions” for additional safety items
BSM Overview
The BSM system monitors the detection areas on both sides of
the vehicle to the rear when vehicle speed is about 20 mph (32
km/h) or greater. The BSM system notifies the driver of vehicles
in the detection areas by illuminating the BSM warning light
located in the mirror. If the turn signal lever is operated in the
direction the BSM warning light is illuminated, the warning light
The Blind Spot Monitoring (BSM) system is designed to assist the
driver by monitoring the detection areas on both sides of the
vehicle to the rear. BSM will alert the driver to possible vehicles
in these areas in certain situations such as when changing lanes
on roads and freeways.
See the unexpected... prevent the unexpected.
ZOOM-ZOOM
9999-95-CX9BSM-08 ©2007 Mazda Motor of America, Inc.
1 BSM Warning Light – Illuminates on start up and when an
object has been detected within the detection area on that side
of the vehicle. Flashes when turn signal lever is operated and an
object has been detected.
2 BSM Warning Beep – Operates when turn signal lever is
operated to side corresponding with illuminated BSM warning
light.
3 BSM OFF Indicator Light – Displays status of the BSM
system. Light will illuminate on startup and when BSM is
deactivated by pressing BSM OFF switch. Light will flash if there
is a malfunction of the BSM system.
4 BSM OFF Switch – Used to manually deactivate the BSM
system.
NOTE: If the BSM is deactivated using the “BSM OFF switch”, BSM will activate
again if ignition is turned off and then turned on, or if the “BSM OFF
switch” is pressed again.
5 BSM Radar Sensors – Located inside the rear bumper on
each side to detect objects.
Names and Functions
Quick System Guide
(For complete operating instructions,
please see your owner’s manual)
will flash and the system will
also warn the driver of the
vehicle in the detection area
with a beep sound.
BSM Operation
Conditions
- Ignition is ON.
- Your vehicle speed is
approximately 20 mph or
greater.
- System is not deactivated.
(“BSM OFF” lamp is not illuminated).
* When ignition is turned on, BSM automatically turns on
- Shift position is other than reverse position.
* If shift position is in reverse position, warning is
automatically cancelled.
Deactivation of BSM
- To deactivate BSM operation, press the “BSM OFF switch”.
Radar output and warning is cancelled and the “BSM OFF”
Indicator Light illuminates.
* BSM will activate again if ignition is turned off and then
turned on, or if the “BSM OFF switch” is pressed again.
- If the system detects a malfunction, it automatically
deactivates BSM operation and “BSM OFF” light flashes.
Customizable Features
The system can be customized so that the BSM warning beep
does not operate when the turn signal lever is operated. Consult
an Authorized Mazda Dealer.
1
4
3
1
4
3
5