Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Assembling The Motor Bracket
Attach the Motor Bracket on the outside of the left grill bowl panel. Align the two holes of the
Bracket with the holes on the grill bowl. Tighten securely using two #10-24 x 3/4" UNC screws,
washers and nuts provided. (See fig. 1).
For some Kenmora grills with lid side panels that ovedap grill bowl side panels (See fig. 2)
Attach Extension Bracket on the outside of the lef_ grill bowl panel. Align the two holes of the bracket
with the holes on the grill bowl. Tighten securely using two Phillips Head Screws 3/16"x7/8", washer
and nuts provided. Then attach the Motor Bracket to the Extension Bracket using two Phillips Head
Screws 3/8"xl/2" and tighten securely.
Fig 1. Fig 2.
2
Outside of left
gdll bowl panel
1
14
13 Extension
Bracket
Outside of left
grill bowl panel_
15
0
Assembling The Rotisserie
Slide the Spit through the piece of meat or poultry and the Holding Forks onto each end of
the Rotisserie Spit. Adjust spacing between Skewers to accommodate your food, then tighten
the Thumbscrews to keep the Food Skewers in position. Slide the Collar and Bushing onto the
threaded end of the Spit. Do not tighten the Collar Thumbscrew until the Rotisserie is placed
into your grill.
5
7
11
9
7
8